Witchdoctor Motorsports

Chapter 71 - Mid February 2007


Things Be Arriving....

Above and below : Motor w/18 degree bowtie CNC heads.


Below: Clutch action. 7.25" triple disc Tilton. On a 105 tooth flywheel.

Below: The much coveted jegsair(tm).

Below: MSD Pro-Billit, Holley HP 4150, pre-assembled fuel line and the ubervalvecovers(tm).


Below: Now before you scroll down let's think about the LT1. The thing had 275hp and could easily go over 350hp on stock heads.

Let's compare some port sizes....LT1 vs 18 degree bowtie CNC.